Zone 1001 - Final Exit- Front Shop Doors To be protected with a Magnetic contact to be concealed within the entrance door to afford maximum perimeter protection.
Zone 1002 - Exit – Front Shop Area To be protected with a Dual Technology Passive Infra Red/ Microwave detector
Zone 1003 - Intruder – Rear Shop Area To be protected with aDual Technology Passive Infra Red/ Microwave detector
Zone 1004 – Personal Attack- Till Area To be protected with a Double Push Personal attack unit
Zone 1005 – Intruder – Prep Area To be protected with a Dual Technology Passive Infra Red/ Microwave detector
Zone 1006 – Intruder – Area Adjacent to Rear Doors To be protected with a Dual Technology Passive Infra Red/ Microwave detector
Zone 1007 – Intruder – Rear Doors To be protected with a Heavy duty surface mounted magnetic contact. To be fitted to the rear doors to afford maximum perimeter protection.
Zone 1008 – Broadband Failure Zone
Control Equipment An Honeywell Galaxy 2/12 grade 2 digitally operated microprocessor control panel complete with standby rechargeable battery and remote keypad. Keypad to be sited to front of shop System operates by means of a four digit code or keyprox unit and uses full English text. Each user has their own code/fob. The system has full upload and download facility and remote diagnostics via a modem link with our computers. For this purpose we will require a secure internet connection. The system incorporates sequential alarm confirmation technology
Control Equipment Notes All Zones with the exception of those designated as personal attack or Final Exit can be programmed to permit isolation of the protection, if required.
Sounding Equipment Internal : An electronic sounder to be fitted to the front shop area adjacent to the entrance doors.
External : A self actuating sounder and flashing strobe light complete with standby rechargeable battery to be housed in a polycarbonate housing and sited to the front elevation of the building
Notification Equipment An Emizon Dual Path IP Signalling comprising of combined IP Internet signalling together with a GSM signalling system. The system connected to a 24 hour manned Alarm receiving centre. With ATS level 3 primary notification and ATS level 2 secondary notification. When an alarm condition is generated, a signal is sent via the internet to the ARC if the alarm is unconfirmed the keyholders are informed, if a confirmed signal is received the POLICE and KEYHOLDERS are informed. Should the telephone lines to the building be cut or interrupted in any way the ARC will receive a "no response" signal which will action a Keyholder Only response .Emizon IP has the added security of a GSM Network so that if a "no response" is then followed by an intruder signal, the signal is sent via the GSM network and the POLICE and KEYHOLDERS are actioned.
|